Bolong Waterproof Material Co

1 Product Overview
Elastic waterproof slurry is a two-component, high polymer-modified cement-based waterproof coating. It is composed of cement inorganic filler special additive powder and liquid high polymer emulsion. Its waterproofing mechanism is the mixing reaction of inorganic powder and organic polymer emulsion to form a waterproof membrane with high elasticity, strong adhesion, no cracking, aging resistance and weather resistance, which prevents the penetration of water. It is a breathable, waterproof and pollution-free membrane. waterproof material.
Two features and advantages
The product is a water-based waterproof coating, which is non-toxic, harmless and pollution-free, and is an environmentally friendly product.
The product can be applied directly on wet or dry substrates of various materials.
The coating is tough, highly elastic, water-resistant, weather-resistant and has excellent durability. It is especially suitable for waterproofing roads and bridges, and can be added with pigments to form a colored coating.
The product can be applied directly on the facade slopes and top surfaces without any clutter, the construction is simple, easy to operate, the construction period is short, and it can dry in an hour at room temperature. The waterproof coating of this product can also facilitate maintenance.
It adheres firmly to various base materials such as base cement mortar and is an ideal repair bonding material. It can form an overall seamless, dense, stable and elastic waterproof layer.
It has good breathability and the waterproof coating has the function of breathing.
Three Scope of Application
Waterproofing of walls inside and outside the house, roof or platform waterproofing.
The pipe wall waterproof coating concrete structure is waterproof for any purpose.
Waterproof coating in bathroom and toilet.
Basement interior and exterior walls are waterproof.
Waterproof coating on the inner layer of the swimming pool reservoir.
Four technical indicators
Serial number inspection item type
Tensile strength
Elongation at break
Impermeability Impermeability Impermeability Impermeability
Drying schedule Drying time
Drying time
Bonding strength Wet base surface
Five construction techniques
Substrate treatment
If the base surface has defects such as loose drums, loosening, sand, ash, cracks and water accumulation, etc. This should be handled beforehand.
First wet the base surface with plenty of water or paint it with an interface treatment agent to ensure a strong bond.
Construction method
After the first coat is dry, apply the second coat, usually once.
Six construction points to note
In order to achieve good waterproofing effect, the following special circumstances should be paid attention to during construction
If there are cracks on the base surface, a layer of anti-cracking glue can be applied to the cracks. Leakage must be plugged using our company's rapid water-proof sealant. Cracks in important buildings can be treated with caulking sealing materials.
The yin and yang angles should be made into rounded corners, such as the base surface and the protruding structure.
If there are yin and yang angles, gutter flashing, pipe roots and other parts, first apply paint once, and immediately paste fiberglass cloth to enhance its toughness.
It is not suitable to construct in temperatures below 10 degrees Celsius or in rain or snow. It is not suitable to construct in a particularly humid and non-ventilated environment, otherwise it will affect the film formation.
The waterproof coating should be used as a protective layer outdoors and in parts that are easy to touch and step on. The construction of the protective layer must be carried out after the waterproof layer is completed.
When the basement is waterproofed, it cannot be immersed in water immediately after the waterproof coating is completed. It must wait until the waterproof layer solidifies and has a certain strength before being immersed in water.
7 Storage, Transportation and Packaging
Liquid materials must be stored in a cool place above ℃, and powder materials should be placed in a dry place. Please note that the shelf life of moisture-proof and sun-proof products is one month.
The powder of this product is packed in composite bags, and the liquid is packed in plastic barrels.
/SETSET/SET